Jar test, jar tester, jar testing, jar stirrer, gang stirrer, lab stirrer, paddle stirrer, stirrer, flocculation, floc, floc tester, flocculation mixer, lab mixer, coagulation tester, jar testers, water, waste water, filtration Products
PB-900 Programmable JarTester
Jar Tester           

 

JAr Testers control panel

 


Click Here to Download Brochure

The Phipps & Bird state-of-the-art six-paddle programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities:

Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm increments.
1 second to 59 minutes and 59 seconds
Programmable Audio Signals.
The stirrer may be run sequentially through the memory banks, independently in any one of the memories, or continuously at a selected speed.

Turning the stirrer off does not erase the programmed information. It permits automatic transitioning from a fast mix/short run to a slow mix/long run, or any combination of speeds and times desired to replicate actual plant conditions and operation.

 

Constructed on a powder-coated steel uniframe chassis, the PB-900 features an LED floc illuminator built into the base, and six stainless steel 1" x 3" paddles spaced six inches apart and which are adjustable to a maximum depth of nine inches. The unit comes complete with your choice of either:

Six standard, round, glass, 1-liter laboratory beakers, or
Six B-KER2 square, acrylic, 2-liter jar testing jars, along with a dust cover and a one-year manufacturer's warranty.


All Phipps & Bird JarTesters are 24VDC and come complete with an adapter to operate them in from 120V, 60Hz and 220V, 50/60Hz power sources.


CE and cTUVus Marked.

 

Phipps & Bird has been building the world’s finest jar testers since 1930’s.  With a minimum amount of maintenance, you can expect your PB-900 to provide over 25 years of dependable service!


IMPORTANT!  CORROSION IS NOT COVERED UNDER WARRANTY.  IF YOUR JAR TESTER OPERATES IN A CORROSIVE ATMOSPHERE, PROTECT IT FROM CORROSION FOR UP TO TWO YEARS WITH CORROSORBER(TM) ABSORBENT PODS. 

AVAILABLE NOW . . . (Click Here)



Get with the program! The PB-900TM Programmable JarTester from Phipps & Bird, the JarTest People!TM

   
PB-950 & PB-980 Series Portable JarTesters


Click Here To Download Brochure

Like its six-paddle big brothers, our Portable four- and two-paddle models stand at the head of their class. All the standard features of the six-paddle stirrer are included with these units, as well. Choose either:

Standard, glass, 1-liter beakers
B-KER2 square, acrylic, 2-liter jar testing jars.

 

All Phipps & Bird Jar Testers operate on 24 volts and come equipped with an Adaptor and 110V and 220V power cords, permitting the machines to operate anywhere in the world.


All Phipps & Bird Jar Testers are CE and cTUVus compliant.

 

 All Phipps & Bird Jar Testers are covered by a

 Two-year manufacturer's warranty.

 

When ordered with the optional heavy duty carrying/shipping case, the PB-750 is ideal for polymer salesmen, health departments, or anyone else performing jar tests in multiple locations.

Column Filtration System (CFS)

















           
Click Here To Download Brochure

Simulate the process of a direct-filtration water treatment plant. The device is an accessory piece of equipment for the traditional Phipps & Bird JarTest Stirrer with Square B-KER2s (not included)
After water samples are agitated through the flash and flocculation stages, the samples are allowed to gravity drain through filter columns producing a simulated "clean" water test sample.  A water line from the plant's service line can be connected to the device to backwash the filter columns when loading the granular media or when cleaning the media after a test procedure.
The device consists of a number (4 or 6) of filter columns (2" ID clear PVC) and sets of valves to control the flow of water samples from the sample B-KER2s and service water during the backwash process. All components are mounted on a portable rack with casters. The CFS mounted on the portable rack can be used in the lab or moved to a more convenient location within the treatment plant.

Dimensions:  Height: 60"
                    Base Width:  4-Place: 34"
                                        6-Place: 46"
                    Depth: 30"
Casters: Swivel (front w/Brake), 3" x 1" Black Rubber       Wheels

Frame: CRS and "Galvaneal" Steel, Powder Coated Galvanized Steel Fastener Hardware

Valves: 3-way Brass

Tubing: 3/8" OD x 1" ID" Copper and Flexible Vinyl

Filter Columns: 2" Clear PVC

  Catalog # Four Place: 7780-100
                   Six Place: 7780-200
B-KER2
Jar testing jar

 

Request Information

 

Now you can draw your jartest samples with a minimum of disturbance to the settling floc. Phipps & Bird's B-KER2® Laboratory Jar has a sampling port conveniently located at the 10cm settling-distance level. There's no need to raise JarTester paddles. Simply open the valve and your sample is gently drawn off.
The B-KER2 Jar is molded of strong, durable 1/4 inch thick acrylic. Its square shape provides thorough mixing action and, in many cases, accurately duplicates actual plant conditions.
The B-KER2 Jar comes complete with a sampling valve.  It is compatible with most Phipps & BirdTM  two- four- and six-paddle Jartesters, as well as most other stirrers.

Catalog #7790-630
Dipper-Type Sampler


           
Click Here To Download Brochure

 

Automatically collects liquid samples from streams, flumes, lagoons, ponds or manholes.
Performs reliably even under conditions of high levels of suspended solids or trash-laden flows . . . conditions where most pump-type samplers are ineffective.
Easy to install; little maintenance required.
Over 25 years of proven dependability in wastewater treatment plants, chemical plants, paper mills, food processing plants, paint manufacturers, textile mills, government facilities and other institutional applications.
  Catalog #8392-301
IncuMate II Incubation Control Module

 



Request Information


Catalog #7600-100

Turn virtually any refrigerator into a laboratory incubator with the IncuMate IITM™ Incubation Control Module from Phipps & Bird. You'll get the consistently reliable test results you require at a surprisingly affordable price.

 

Specially designed for use by smaller water and wastewater treatment facilities, the Phipps & Bird IncuMate IITM lets you utilize a refrigerator to perform any incubation procedure requiring a temperature range of 5°C to 40°C including: biochemical oxygen demand (BOD), trihalomethane formation potential (TFP), heterotrophic plate count (HPC) and Coliform.


Just place the IncuMate IITM unit on a wire shelf in a refrigerator, make the simple electrical plug-in connections and turn it on.


Refrigerators with automatic defrost modes should have the defrost feature disconnected.


The module's adjustable thermostat is factory set at 20°C. To raise the temperature, turn the dial to the left; to lower the temperature turn the dial to the right. The 
IncuMate IITM'S built-in heater and circulating fan will operate continuously to provide thorough air circulation at the desired temperature. At start-up or after the temperature control has been reset, the temperature will stabilize in about an hour. Monitor the temperature with a quality-grade thermometer.


For the smaller lab that performs a nominal number of incubations each day, Phipps & Bird's IncuMate IITM™ Incubation Control Module is the economical alternative to high-priced incubators.

 

 

5¼"w x 3¾" l, 110v & 220v
1-year warranty on parts and labor

Highly reliable BOD test results don't
require highly priced incubators.

 

 

Vacuum Filtration Manifolds

 

Request Information

Ideally suited to procedures outlined in Standard Methods For The Examination of Water and Wastewater (Solids/Residue Section) and other applications where vacuum filtration is required.
Easy to set up; simple to use.
Built of rugged, lightweight PVC.
Brass valves provide many years of service.
Permits simultaneous or independent filtration.
3 and 6 station models stocked. Custom sizes available upon request.
Available as a manifold only (pictured) or deluxe version complete with reservoir and vacuum pump.


The 8400-Series Vacuum Filtration Manifolds from the Phipps & BirdTM Family of Water Quality Equipment.
Groundwater Sampler

 

Request Information

Take quick samples of liquids in recovery wells, storage tanks, leachate monitoring wells, and drums with our Groundwater Sampler. A baler-type sampler, it collects liquids at any depth over three inches. Catalog number 8390-000
One-liter volume.
Teflon-ball check-valve assembly is easily removed for simple cleaning.
Stainless steel sampler tube is 48" long with an outer diameter of 11/2".
Weight: five pounds.
Also available in .5 liter capacity.

Catalog #8390-500
Crown Press Belt Press Simulator

 

Request Information

Now you can accurately simulate a full-size belt press, duplicating the actual dewatering process, with Phipps & Bird's Crown Press Belt Press Simulator.


The unique "crown" design allows the sludge cake to react as it would under normal operating conditions, including the effects of free water motion across both the top and bottom belt faces; shear; capillary channeling; sludge migration; response to pressure changes; and the effect on filtrate flow using different types of belt material.


Without shutting down the big machines, the Crown Press Simulator permits the operator to:

Prescreen to select the best polymers and belt types.
Determine proper belt tension.
Estimate optimum machine throughput.
Estimate sludge cake moisture and filtrate clarity.
Determine sludge migration.

The Crown Press Simulator comes complete with plow simulator, carrying case and a comprehensive manual.

Catalog #7800-100
 

Call Toll-Free (800) 955-7621 in Virginia (804) 254-2737

Fax - (804) 254-2955

Email - info@phippsbird.com


Hablamos Español

Disclaimer: The information on this website is presented solely as ‘entertainment’. Visitors/viewers must subscribe to and accept all the provisions listed below as a condition to viewing the material on this site: 1) Visitors are granted access to view and use at their own risk any materials and information presented herein. No claims are made by Phipps & Bird as to the accuracy, currency, validity, or reliability of any materials or information appearing on this website, to include but not limited to pricing information; laboratory procedures and formulas; implied or express product use or effectiveness; etc. 2) All information on this website is copyrighted by Phipps & Bird, Inc. Visitors may copy or print off only for their own use any of the materials on this website. Images and materials may NOT be copied to other websites, redistributed in any form, or republished in any format whatsoever without the written permission of an authorized representative of Phipps & Bird, Inc. 3) Nothing presented on this website shall be inferred nor construed to be a contract, agreement, covenant, promise or binding commitment of any kind. 4) All information, offers, features, pricing, terms, et al, may be changed, withdrawn, discontinued or rescinded at any time without notice. Photographs may or may not be an accurate and current representation of the depicted subject. 5) Phipps & Bird, Inc. is released of any and all liability resulting from the use, misuse, or misinterpretation of any of the information herein presented. This includes scientific formulas, procedures, charts, graphs, et al., the accuracy of which should be independently verified by the user.
© 2017
 Phipps & Bird, Inc.